Robot Vacuum Cleaner
EN
19
Dust escapes from the device during
cleaning.
The dust container or fi lters are not fi tted
correctly.
►
Correct the fi t of the dust container
and fi lters. Make sure that the dust
container is closed.
The fi lter is dirty.
►
Clean the fi lter.
The fi lter is worn or damaged.
►
Replace the filter.
The charge control lamp (3) does not
light up when the device is connect-
ed to the mains power.
The charger is not inserted in the plug
socket correctly or the barrel connector is
not inserted in the connecting socket (
12
)
of the device correctly.
►
Correct the fit.
The plug socket is defective.
►
Try another plug socket.
There is no mains voltage.
►
Check the fuse of the mains connec-
tion.
Unusual odour
The device is being used for the fi rst
time.
►
A new odour is normal when the
device is used for the first time; it
disappears after a while.
The device stops, but remains
switched on. The operating lamp (1)
lights up alternately red and green.
The wheels (
7 and 13
) and / or side brush-
es (
6
) are blocked.
►
Remove the blockage.
The device rotates around its own
axis.
A wheel (
7 or 13
) is blocked.
►
Remove the blockage.
DISPOSAL
Dispose of the packaging material
in an environmentally friendly man-
ner so that it can be recycled.
The battery should be removed
before the device is disposed of
(see the “Inserting / Removing
the Battery” chapter) and should
be disposed of separately from
the device at suitable collection
points.
This device is governed by the
European Directive 2012/19/EU
on waste electrical and electron-
ic equipment (WEEE). Do not
dispose of this device as normal
domestic waste, but rather in an
environmentally friendly manner
via an offi cially approved waste
disposal company.
09524_Inlay_DE-EN-FR-NL_A5_V1.1.indb 19
09524_Inlay_DE-EN-FR-NL_A5_V1.1.indb 19
03.09.2020 14:59:18
03.09.2020 14:59:18
