Face Contour
EN
15
HOW IT WORKS
Cold Phase
The cold phase of the device is based
on the principle of cryolipolysis, break-
ing down fat cells with a cold treatment.
The metal plate (
12
) of the device at a
temperature of approx. -1°C is placed on
the area of unwanted fat. This causes the
metabolism of the fat cells to stop and
they die.
Massaging the treated area squashes
down the dead fat cells and they are
transported into the healthy fat tissue.
From there they are flushed out via the
lymph vessels and blood vessels over the
course of around 3 to 6 weeks.
For this massage purpose, the metal plate
vibrates gently during the cold treatment.
L
L
After the treatment, you may ex-
perience a feeling akin to aching
muscles for a few days. This is nor-
mal and not a cause for concern.
Heat Phase
Following the cold phase, the device auto-
matically switches over to the heat phase in
which the metal plate reaches a tempera-
ture of approx. +44°C with gentle vibration.
This supports blood flow and therefore the
flushing out of the dead fat cells.
The heat phase can also be used to
improve the appearance of a defined
jawline.
Massage Phase
After the device is switched on, it starts
with a massage. The vibration of the
metal plate (
12
) is designed to expand the
intercellular spaces in the skin so that the
vibrations can have a massaging, regener-
ative, tightening and purging effect deep
into the skin and tissue.
This phase is capable of reducing swelling
and rings under the eyes and improving
the structure of the skin.
USE
Please Note!
■
For reasons of hygiene, the device
should only be used by one person
and cleaned after each use (see
“Cleaning and Storage”). Keep the
device clean.
■
If you experience an unpleasant sen-
sation while you are using the device,
stop applying it immediately!
■
Leave out the area of the eyes and
the area of the thyroid glands.
■
Do not use the device on one area
of skin for longer than 5 minutes per
phase per day so that no strain is
placed on the skin and tissue.
With the exception of the area of the
eyes, the device can be used to treat the
whole face as well as the neck and the
neckline. We recommend starting with
a 2-minute application time per phase
and gradually increasing the time up to 5
minutes.
Before treatment, clean the face and
dry it well in the usual way. If necessary,
apply a little moisturising cream. Do not
use too much cream so that excess cream
which is not absorbed by the skin cannot
get into the device and damage it.
Attaching a Cloth or Pad to the
Device Head
If the metal plate (
12
) is perceived to be
too cold or too warm, we recommend
attaching a cloth or pad as a buffer to the
head of the device (
6
):
1. Remove the attachment clip (
3
) from
the head of the device.
2. Place a cloth or pad on the metal
plate and press the attachment clip
onto the head of the device to fix the
cloth / pad in place. (
Picture E
)
06161_Inlay_A5_de-en-fr-nl_V1.indb 15
02.03.2020 18:19:23
