EN
31
The recording stops shortly after the engine has been switched off, or when
the dashcam stops being moved. However, the dashcam remains switched
on and starts to film again when it is moved again.
L
If the vibration sensor was switched off in the video settings (see
“Settings” – “Video Settings”), the recording can only be started
and stopped manually.
Manual Switching On and Off
•
Switching on: Briefly press the
button (
13
).
•
Switching off: Hold down the
button for a few seconds.
Selecting a Mode
The dashcam has the three modes of video, photo and playback. To select
a mode, press the
M
button (
12
) repeatedly. The symbol for the active
mode is shown in the top left corner of the display (
19
):
Video
Photo
Playback
Video Mode
After the dashcam is switched on, it starts video recording. When this is
happening, a red dot flashes at the top of the display.
Press the
OK
button (
17
) to manually stop or restart the recording.
Содержание 04502
Страница 80: ......
