Warranty
Pre-installation
PLANNING INSTALLATION
Before beginning assembly of the product, make sure all parts are present. Compare parts with the package contents list and hardware contents. If
any part is missing or damaged, do not attempt to assemble the product.
A\
WARNING: Tum off electricity at breaker box before beginning
� installation.
Carefully remove the unit from the carton.
Check area above installation location to be sure that wiring can run to the planned location and that duct work can be run and the area is sufficient
for proper ventilation.
Inspect duct work and wiring before proceeding with installation.
Before installation, provide inspection and future maintenance access at a location that will not interfere with installation work.
You may need the help of a second person to install this fan; one person on the attic side and one on the room side.
NOTE:
Installation may vary depending on how the previous bath fan
r-6\
was installed. Supplies necessary for the installation of your bath fan are
D
not all included. However, most are available at your local home
improvement or hardware store.
TOOLS REQUIRED (not included}
Claw
hammer
EB
Phillips head
screwdriver
Drill
bits
Utility
knife
e
4
Flathead
screwdriver
0-
Duct
tape
Electric
drill
Three
Year Warranty:
Maxxima extends a
3
year limited warranty to the original purchase that the products listed are
free from defects in material and/or workmanship only. Maxxima will replace any warrantied
product to the original consumer/purchaser if the product fails because of defects due to
workmanship and/or materials within the limited warranty period. Limited warranty is not
transferable and applies to the original installation of the Maxxima product. This offer does not
constitute in any way a product guarantee and Maxxima does not hereby assume any obligation
whatsoever beyond sending a free replacement product.
Содержание Luvoni MEW-VF270L
Страница 3: ...Current 0 33A 39 6W To Switch To Neutral To Switch To Neutral To Ground Lumen Output CCT 600LM 3000K ...
Страница 7: ...Typical hole cutout is 7 5 X 7 3 ...
Страница 8: ......