16
5. Timer operation
Timer ON setting:
-
When the air-conditioner is OFF, press the “Timer” button and select a desired ON time through the
temperature and time setting buttons.
-
“Preset ON Time” is displayed on the operation panel.
-
ON time can be regulated at any time in 0-24 hours.
Timer OFF setting
-
When the air-conditioner ON, press “Timer” button and select a desired OFF time through the
temperature and time setting buttons.
-
“Preset OFF Time” is displayed on the operation panel.
-
OFF time can be regulated at any time in 0-24 hours.
6.Continuous Drainage
Internal Tank Water Full Alarm Function
The inner water tank in the air-conditioner has one water level safety switches, it controls the
water level. When water level reaches an anticipated height, the water full indicator lights up.
When the water is full, please remove the rubber blockage from the drainage hole at the bottom
of unit, and drain all water outside.
Continuous Drainage
-
When you plan to leave this unit unused for a long time, please remove the rubber blockage
from the drainage hole at the bottom of unit, and drain all water outside.
-
You can use the continuous drainage with a drainage hose connected to the bottom drain hole,
when the unit working at the HEAT mode.
-
The continuous drainage is not need to be applied when the unit working at the COOL or
DEHUMIDIFY mode. The unit can evaporate the condensate water automatically by the
splash motor. Make sure the drainage holes are stemmed well.
-
If water splash motor is damaged, continuous drainage can be used. To connect the drain
hose to the bottom drain hole (fig.9), the unit can also work well.
-
If splash motor is damaged, intermittent drainage can also be used. Under this condition, when
the water full indicator lights up, please connect a drain hose to the bottom drainage hole, then
all the water in the water tank will be drained outside. The unit can also work well.
7. Installation Explanations
1.
Installation Explanations:
-
A removal air-conditioner shall be installed in the flat and empty place all around. Don’t block
the air outlet, and the required distance around should be at least 30cm. (See Fig.8)
-
Should not be installed in dry cleaner.
-
Socket wiring should be in accordance with the local electric safety requirements.
7. Installation Explanations
