FOr INsTALLATION BEHIND TrIANGULAr GABLE VENTs
For installation behind triangular gable vents, refer to steps 1-3 on the opposite page and the following
illustrations for reference.
step 1
step 2
step 3
THErMOsTAT INsTALLATION
WArNING
Before wiring the thermostat, turn the power off at the breaker to avoid electrocution.
Be certain to confirm to all Local Electric Codes and Regulations.
Remove the cover from the thermostat box and, using screws to prevent damage to the control, attach
the mounting plate to a stud.
Leave the back side of the control unobstructed to allow free air circulation behind the box.
Wire the unit to the incoming power supply according to the diagram above.
The thermostat is adjustable. Recommended setting is 90-110 degrees F depending on local
temperatures. Setting is fan-on and fan-off.
The fan will run as long as the attic temperature remains above the set temperature.
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728 1-800-433-1626 Fax: 940.325.9311 www.BVC.com
3
•
Before wiring the thermostat, turn the power off at the breaker to avoid electrocution.
•
Be certain to conform to all Local Electric Codes and Regulations.
•
Remove the cover from the thermostat box and, using screws to prevent damage to the
control, attach the mounting plate to a stud.
•
Leave the back side of the control unobstructed to allow free air circulation behind the box.
•
Wire the unit to the incoming power supply according to the diagram above.
•
The thermostat is adjustable. Recommended setting is 90-110 degrees F depending on local
temperatures. Setting is fan-on and fan-off.
• The fan will run as long as the attic temperature remains above the set temperature.
WARNING
ELECTRICAL SHOCK
