Maxx 20574, Руководство пользователя

Страница: 16 / 28

OPERATION
Recoil starter: Use short pulls-only 1/2-2/3 of
rope length for starting.
Don't allow the rope to snap back in. Always
hold the unit firml
y.
STARTING COLD ENGINE
1. Close Choke-Cold Start. Move choke (B)up
to “Cold Start”position.
2. Pri
mer
Buld-P
rime
. P
ump primer
bulb(C)
until fuel is visible and flows freely in the
clear fuel tank return line. Pu
m
p bulb an
additional 4 or 5 times.
3.Move throttle lever(A)to START/IDLE
DETENT position. And
move
the stop switch
to "START" position. Then push choke lever
upwards(B) (excessive cranking with choke
lever will cause flooding engine
m
aking it
difficult to start.)
4.Press and release the
Primer
bulb until it is
filled
with fuel(C).Pull recoil starter handle(D)
until engine fires(5 or 6 pulls)
5.Move choke (E)to run position and if
necessary, restart engine.
m
ake sure the
button is locked
A
B
STARTING WARM ENGINE
1.Move throttle lever(A)to idle detent position.
And
m
ove the stop switch to "START"
position. Then push throttle level inwards
(excessive cranking with choke lever will
cause flooding engine
m
aking it difficult to
start.)
2.Pull recoil starter handle and engine should
start. Do not use choke(B)
-14-
fi