Maxwell MW-1754 W, Инструкция по эксплуатации

Страница: 9 / 28

9
ENGLISH
•
To avoid the risk of electric shock, do not
immerse the unit, the power cord and the
power plug of the unit into water or other liq-
uids.
• Unplug the unit from the mains if you are not
using it or before cleaning.
•
Do not wash the thermopot in a dishwashing
machine.
•
Before taking the thermopot away for stor-
age and before cleaning, unplug the unit,
pour out water and let the unit cool down
and dry.
• For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger of
suffocation!
• Do not allow children to touch the unit body,
the power cord or the power plug during
operation of the unit.
• Do not leave children unattended to prevent
using the unit as a toy.
•
Close supervision is necessary when chil-
dren or disabled persons are near the oper-
ating unit.
•
This unit is not intended for usage by chil-
dren.
•
Children and over as well as disabled per-
sons can use this unit only under supervi-
sion of a person who is responsible for their
safety if they are given all the necessary and
understandable instructions concerning the
safe usage of the unit and information about
danger that can be caused by its improper
usage.
• Do not use the unit outdoors.
•
To avoid damages, transport the unit in origi-
nal package only.
• Never pull the power cord when disconnect-
ing the unit from the mains, take the power
plug and carefully remove it from the mains
socket.
•
Do not attempt to repair the unit. Do not
disassemble the unit by yourself, if any mal-
function is detected or after it was dropped,
unplug the unit and apply to any authorized
service center from the contact address list
given in the warranty certificate and on the
website www.maxwell-products.ru.
• Keep the unit out of reach of children and dis-
abled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE
ONLY, ITS COMMERCIAL USAGE AND USAGE IN
PRODUCTION AREAS AND WORK SPACES IS
PROHIBITED.
BEFORE USING THE UNIT FOR THE FIRST TIME
After unit transportation or storage at low
temperature, it is necessary to keep it for
at least 3 hours at room temperature before
switching on.
•
Unpack the thermopot, remove any stickers
that can prevent unit operation.
• Check the thermopot for damages, do not
use it in case of damages.
• Before switching the unit on make sure that
its operating voltage corresponds to the volt-
age in your mains.
• Open the lid (11) by pressing the button (6)
and holding it.
•
Fill the thermopot with water using a suitable
bowl, do not exceed the maximal water level
mark (14) «FULL» on the inner surface of the
thermopot flask.
• Insert the power cord (17) connector into the
socket (16) on the thermopot body, and the
power plug into the mains socket. The ther-
mopot will be switched to boiling mode, the
«Boiling» indicator (19) will light up on the
control panel (5).
• After water starts boiling, the thermopot will
be switched to the keep warm mode, the
«Keep warm» indicator (20) will light up.
•
Place a suitable bowl under the spout for
pouring water (4), press the water dispense
button (22) «Dispense» and pour the water
out of the thermopot.
• You can dispense water by pressing the
water dispense ON-button (3) with a mug,
for instance.
• You can also dispense water using the hand
pump (7) after having previously set the hand
pump lock (10) to the position «
».
•
To prevent accidental pressing of the hand
pump, set the hand pump lock (10) to the
position « ».
• After use disconnect the unit from the mains
by removing the plug of the power cord (17)
from the mains socket and detaching the
power cord from the socket (16).
•
While keeping the lid (11) closed, press the
lock (9) and remove the lid upwards as you
hold the button (6).
MW-1754.indd 9 06.09.2018 12:45:58