![background image](http://html.mh-extra.com/html/maxwell/masf036-n1/masf036-n1_user-manual_1746296006.webp)
C)
Installing from the ceiling:
(Note: this installation is NOT recommended; the ceiling brackets are not supplied)
4.3.1 Remove the attached mounting plate by
removing the fixed screws on the back of the
main body.
4.3.2 Securely mount the ceiling brackets (not
included) see figure below.
4.3.3 Set mounting plate to the ceiling brackets
and tighten securely. The position of the mounting
plate can be adjusted in a vertical direction
according to the application needed.
Max distance 100 mm.
4.3.4 Do the same as step A to install the main body.
B
Installing on a wooden wall: (Note: make sure the screws are secured in the wood, attach an
extra wood frame to the wall if needed for safety purposes.)
4.2.1 Remove the attached mounting plate by
removing the fixed screws on the back of the
main body to determine the precise mounting
location. Securely mount the mounting plate
to the wooden wall with tapping screws.
See figure below.
4.2.2 Hang the main body onto the upper end of the
mounting plate, and then tie the bottom fixing screws
back to the mounting plate.
4.1.3 Tighten the nuts to secure the mounting
plate to the wall after cement setting (use washers
and nuts) see figure.
4.1.4 Hang the main body onto the end of the
mounting plate, and then tighten the bottom fixing
screws back to the mounting plate.