Maxview URC6D, Руководство по программированию и эксплуатации

Страница: 5 / 8

5
If you are still unable to use any of the program device codes and your original remote
can still be used, you can use the learning function to copy the codes from your
original remote to the URC6D remote. Please follow the guide below to use this
function.
LEARN THE CODE TO YOUR REMOTE CONTROL
1. Turn on a device (such as TV, DVD, VCR, SAT…) you would like to program the
remote to operate.
2. Press device button on remote & hold the learn button until it remains lit.
3. Now place the original remote control and your URC6D on a flat surface with the
infrared windows facing each other, making sure you keep them within 5cm of
each other. Press the button that you would like to learn on your original remote
control.
4. Press the button that you want to learn on the original remote control, the device
button LED will blink slowly. This means the buttons functions are being transferred
over to the URC6D.
5. Now press the button that you want to learn on the URC6D remote control. The LED
will then stop blinking and remain lit. This means the learning of the button has
succeeded.
6. Then repeat steps 4 to 5 above to learn any additional buttons that you require.
7. To save and exit learn mode press the LEARN button. The device button’s LED will
turn off.
8. To learn other devices I.E a satellite receiver, repeat all steps (1-7) above
DELETE A LEARNT KEY
1. Press and hold the device button and [POWER] button at the same time, for
about 3 seconds until the device LED indicator lights up, then release both
buttons.
2. Enter the operation code ”9990”.
3. Then press the button you want to remove. The LED will slowly blink twice and
removal is complete. However if the LED quickly blinks twice it means the button
was never learnt originally.
4. Repeat step 3 above if further functions are no longer required and need clearing.
DELETE ALL LEARNED KEYS OF A DEVICE
1. Press and hold the device button and [POWER] button at the same time, for
about 3 seconds until the device LED indicator lights up, then release both
buttons.
2. Enter the operation code ”9991”.
3. All learnt functions and the complete device is now removed from the memory.
Light will then blink twice and go out.
DELETE ALL LEARNED DEVICES
1. Press and hold just one of the device buttons and [POWER] button at the same time,
for about 3 seconds until the device LED indicator lights up, then release both
buttons.
2. Enter the operation code ”9995”.
3. All learnt functions on all devices have then been successfully removed from the
memory. Note light will blink twice and go out.
5. LEARN FUNCTION OPERATION GUIDE