Maxview Precision - SKY Q Only Variant, Инструкция пользователя и эксплуатации

Страница: 7 / 16

Once satellite is located, lock off the rotation by
turning Azimuth lock knob. If you are experiencing
signal drop out, fine tune your signal by slightly
adjusting the elevation to improve TV picture
quality. Again, you can aid this process by using:
1. The integrated sat finder.
2. Your receivers built in sat finder.
Slowly rotate your dish from left to right
through the zone until the correct satellite
is located and a picture appears on your TV.
To aid the satellite location process you can
use the following methods:
1. Use the integrated sat finder (page 8).
2. Turn your TV and SKY Q™ receiver on and use
the screen as your guide that you have located
the satellite.
8 9
TV
ASTRA 2
7
IMPORTANT
Do not block the antenna’s line of sight to satellites in the southern sky at any time. Make sure
your dish has clean line of sight avoiding, buildings, trees and any other close by obstacles.
✔
✘
✘
✘
!
Line Of Sight