1.
Pack contents check
Join the 2 pieces of boom together using the
joining plate, M5 x 20mm screws M5 nuts and
5mm Shake Proof Washers.
2.
3.
4.
Assembly
A. Rear Boom x 1
B. Front Boom x 1
C. Fixing Bracket x 1
D. Swing Arm Boom x 1
E. 10m Coaxial Cable x 1
F. Dipole x 1
G. 6½ Screw x 2
L. No.10 1” Screw x 4
M. M5 Screw x 3
N. Washer x 2
H. Joining Plate x 2
I. Wall Plug x 4
J. Insulator Cap x 1
K. M5 Nut x 3
Screw on firmly the Dipole to the Boom.
Slide on and firmly push down the Reflector onto
the groove of the Reflector Bung.
Attach Swing Arm Boom to the aerial
Boom using a No.6½” Screw.
B
A
J
F
H
N
K
M
A
5.
6.
Mount Fixing Bracket to suitable wall using the
No.10 1” Screws and Wall Plugs.
Insert Swing Arm Boom into Fixing Bracket and
secure together with a M5 Screw and M5 Nut.
O. Coaxial Plug x 1
P. Cable Clip x 8
E
C
D
O
P
I
L
G
Connecting Coaxial Cable
1.
Thread coaxial cable through Dipole Cap. Strip
away 25mm of outer insulator. Gather outer braid
strands and twist together. Remove 10mm of
inner insulation around inner core.
Loosen the screws on the 2 terminals in the
Dipole. Feed the inner core to one of the
terminals and the twisted braid into the other.
Tighten screws and close Dipole Cap.
Inner
core
25mm
10mm
Outer
braid
Outer
insulator
Inner
insulator
Foil
2.
