manualshive.com logo in svg

MaxTronic Orion 410SR, Руководство пользователя

Поделиться
Скачать
MaxTronic Orion 410SR Скачать руководство пользователя страница 23

Maxtronic Orion 410SR User Guide

9

 

 

Hardware Installation

10. Now you could push back the front panel door 

and locked for next setp.

Do not install the HDD(s) into the Orion 410SR NAS Sys-

tem while it’s powered off under any conditions. 

The following are exceptions:

1.  The HDD(s) have been initialized by the same Orion 410SR 

and have been performing daily routine tasks.

2.  Performing “Disk Roaming” procedure to reduce system 

down time. 

To perform “Disk Roaming“:

a.  Power off the old NAS system.

b.  Execute Factory Default on the new NAS system and 

then power it off.

c.  Remove the HDD(s) from the old NAS system.

d.  Insert the HDD(s) into the new NAS system. Please be 

sure the model and firmware of the new system are the 
same as the old one.

e.  Power on the new NAS system and Disk roaming is com-

plete.

Hot plugging previously initialized HDD(S) will overwrite existing 
user configurations, RAID settings, and any data in the drive.

Содержание Orion 410SR









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды