MaxTronic JanusRAID II SA-6651E, Руководство пользователя по оборудованию

Страница: 12 / 30

2
SA-6651E Serial ATA II Disk Array Systems
1
Syste
m
Re
quir
e
m
ents –
VT100 Terminal Settings
Refer to the following table for a summary of VT100 terminal settings required to com-
municate with the disk array system. Refer to your system manual for instructions on
setting up the VT100 terminal settings.
Ethernet settings
SA-6651E supports DHCP (Dynamic Host Configuration Protocol) to get a IP address or
a default IP is 192.168.0.1; You could find it from LCD scrolling. SA-6651E had embed-
ded CGI-based GUI (graphic user interface) management interface can be easily
accessed through a web browser.
Item Required Setting
Connection Serial Port (COM1 or COM2)
Protocol RS232 (Asynchronous)
Cabling Null Modem cable
Baud Rate 115200
Data Bits 8
Stop Bit 1
Parity None