Maxtor SATA /150 PCI CARD, Руководство по установке

Страница: 15 / 31

Install Windows Driver 11
Install Windows Driver
The next step is to install a Windows driver for the card so that it can be properly identified by the operating
system. This kit includes either a floppy disk or a MaxBlast CD containing the drivers for the card. If you do not
have a floppy drive, the latest drivers for the card can be downloaded from the Software Downloads section of
the Maxtor Support website at www.maxtor.com.
The Maxtor SATA/150 PCI Card is compatible with Windows 98SE (Second Edition), Windows Me, Windows
2000, and Windows XP. For maximum compatibility, Maxtor recommends updating to the latest Service Pack
from Microsoft at windowsupdate.microsoft.com.
Existing Windows 98 Installation
The following section details the installation of SATA/150 PCI Card drivers on a system that has Windows 98
already installed and running.
1. After installing the SATA/150 PCI Card and configuring the hard drive, power up the system and boot into
Windows.
2. The Add New Hardware Wizard will appear, informing you that it has found a PCI Mass Storage Controller.
3. Click Next, then choose Search for the best driver for your device (Recommended).
4. Insert the provided driver diskette or CD. (If you inserted a CD, close the language chooser that appears.)
5. Click Next, then mark the Specify a location checkbox and click Browse.
6. Browse to the Win 9X-Me folder on the CD or floppy.
7. Click Next. A message informing you that Windows has found Win98-ME Maxtor SATA/150 PCI Card should
appear.