5
1. POWER
Please use the provided adaptor to connect power cord (Other adaptors are not suitable for this machine).
2. EXTERNAL I/O
•
Controlled remotely by an external device or control system.
•
Alarm input, external I / O explanation.
3. 75
Ω
/ HI
When using Loop function, please switch to
HI.
If you don
’
t use Loop function or disconnect the video
input, please set it as
75
Ω
.
4. VIDEO INPUT (1-16)
Connect to video source, such as camera.
5. LOOP (1-16)
Connect video signal between Input port and Loop port to make a loop.
6. AUDIO IN (1-4)
Connect to audio source, such as microphone.
•
IPS should be set to 25A (for NTSC) or 18A (for PAL)
✻
4 audio inputs, but users can only select 1 for recording.
7. AUDIO OUT (R/L)
Connect to monitor or speaker.
•
IPS should be set to 25A (for NTSC) or 18A (for PAL
)
✻
wi
th 2 mono audio outputs from the same source.
8. MONITOR
Connect to Main monitor.
9. CALL
Connect to CALL monitor. Show the Switch Display. When the alarm is triggered, the call monitor will show
the triggered channel for a period of time.
10.LAN
Connect Internet by
LAN cable.
BACK PANEL
8
6
7
5
4
1
2
3
10
9