MAXTEK 71382, Руководство пользователя

Страница: 7 / 12

5
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
REP.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
enquiries@quesh.co.uk
Before using the bluetooth headphones for the first time please
make sure they are fully charged.
Connect the supplied charge cable to the headphones and a
suitable 5V/300mAh power supply. A PC or Laptop USB port is
preferable.
When the headphones are charging a red LED will light up and then
go out once fully charged.
If the LED is flashing red the headphones are low on power.
Charging
If the headphones are left inactive for 3 minutes the headphones
will change to standby mode. Press any button to bring the
headphones out of standby mode.
If the headphones are left inactive for 30 minutes they will turn
themselves off.
Standby/Power Off
Press and hold the center button for 3 seconds to turn on the
the headphones. An audio alert ‘power on’ will confirm they are on.
Press and hold the center button until the audio alert states
‘power off’, then the headphones will turn off.
Turning On/Off