4
1.
Master Power (On rear): Push to provide power to the monitor. This switch
should be left ON for daily operation. Use the front panel On/Off control (3) to
turn the monitor display on and off.
2.
Power Saving Indicator: When lit, the monitor is in the DPMS OFF mode.
3.
ON/OFF: Press this switch to turn the monitor display on, press again to turn
the monitor display off.
4.
Power On Indicator: When lit the monitor is powered on
5.
Adjust: Press plus (+) to increase the setting for the selected OSD param-
eter. Press minus (-) to decrease the setting.
6.
Select: Press either button to enable the OSD display. Press (
Ø
Ø
Ø
Ø
Ø
) to select the
next OSD parameter. Press (
×
×
×
×
×
) to select the previous OSD parameter.
7.
Contrast Control: Adjusts the contrast of the display.
8.
Brightness Control: Adjusts the display brightness.
2
3
4
8
Figure 3-2 Control and LED Locations
7
6
5
