MaxTech xpm56i 56K BPS Скачать руководство пользователя страница 3

1

Section One - Introduction

This 56 Kbps* Plug and Play FAX/Data Modem

connects your computer to all popular high speed
modems available today. The modem incorporates

“K56Plus” (56Kbps)

 technology to provide increased

download speeds using regular telephone lines. The
modem incorporates Plug and Play for ease of instal-
lation.

This manual describes the hardware installation

procedures for your new modem. Additional informa-
tion on AT commands and S-registers is provided so
that your system can be customized for a particular
operating environment.

*Note: K56Plus is capable of downloading at 56Kbps.
However, current FCC regulations limit its speeds to
53Kbps.

Section Two - Installation

This section will provide step by step instructions

on how to install your new 56 Kbps FAX/Data modem.
Installation of this modem product is a three-step
process consists of 1) actual hardware installation, 2)
plug and play configuration, and 3) communication
software installation and configuration.

2.1 Unpacking Your Modem

Be certain that you have all the items listed

below. This package contains:

• A modem

• A telephone cable

•  User's  manual

• Software for the modem

• Software user's manual

2.2 What You Need

You will need:

1. A phillips-head screw driver
2. A) A Plug and Play enabled Operating System

(e.g., Windows 95),

or

B) A Plug and Play Revision 1.0a compliant PC.

Содержание xpm56i 56K BPS






















Отзывы: