1
Section One - Introduction
MaxTech’s NX-32PCI Series network adapters are
high performance, full duplex 32-bit adapters con-
forming to IEEE 802.3 standards for use on 10
Mbps Ethernet networks. The adapters are compli-
ant with PCI Local Bus Specification Revision 2.0
providing 32-bit data transfer for maximized data
throughput and optimized CPU utilization. LED
status indicators are provided for monitoring or
troubleshooting network activities.
Two cable connectors (RJ45, BNC) on the cards
provide flexibility in attaching to Ethernet networks.
The cards automatically detect the media type
used. Also included are drivers supporting all popu-
lar network operating systems.
Section Two - Installation
This section will provide step by step instructions on
how to install your new MaxTech network adapter.
Installation of this network adapter consists of A)
hardware installation, B) card configuration and C)
network driver installation.
Contents
Section One - Introduction ................................. 1
Section Two - Installation .................................. 1
Section Three - Driver Installation ..................... 8
Section Four - Using the Remote Boot ROM .. 10
Section Five - Troubleshooting ......................... 11
Section Six - Cable Information ....................... 12
Section Seven - Specifications ........................ 12
Section Eight - Technical Support ................... 13
Section Nine - Notices ..................................... 13
