10
Chapter 2 General Safety Information
WARNING ：
◎ Make sure the shell of this equipment is properly grounded. Any
interruption of the ground loop may result in personal injury.
◎ Make sure that the input DC voltage of the laser is the voltage of the
normal DC mains, and wires are connected accurately. Any incorrect
wiring method may cause damage to people or instrument.
◎ Before supplying the power to the device, make sure that the correct
voltage of the DC power source is used. Failure to use the correct voltage
could cause damage to the device.
◎ No operator serviceable parts inside. Refer all servicing to qualified
Maxphotonics personnel.
◎ To prevent short circuit, do not remove shell, detach the laser without
permission and damage the relevant signs. Any product with unauthorized
dismounting shall not be subject to warranty.
5.Environment Conditions and Precautions
We strongly recommend that you read the following procedures before
operating the laser :
（1）Do not expose the laser to a high moisture/high temperature
environment. Install the laser in the cabinet with the function of
temperature-humidity control and dust-free
（2）Laser Module has at least three fans at the rear panel for active
cooling. Make sure that there is at least 5cm between fan protector and
external objects, and with sufficient airflow to cool the device.
Cable Colour
Supply
BROWN
+24VDC
BLUE
GND
YELLOW-GREEN
SHELL
