MAXPHOTONICS CO.,LTD
WWW.MAXPHOTONICS.COM
7
WARNING:
MFP-20 Fiber Laser Module has three fans at the rear panel for
active cooling. Make sure that there is sufficient airflow to cool the
device.
WARNING:
NEVER look directly into output head and make sure that you
wear appropriate laser safety glasses at all times while operating
the product.
WARNING:
When you marking on the copper material, please do not to make
the marking area in the central ,or it will be damaged the laser.
WARNING:
Power supply interruption is very dangerous for the equipment,
please provide continuous uninterrupted power supply voltage
CAUTION:
In addition to the manual of controls or adjustments or
performance, other operations may cause the risk of radiation
exposure
CAUTION:
It’s essential to keep the output lens cleaning. After use, please re-
covered the collimator.. Do not touch the output lens,. Please use
the lens tissue to clean it and do not use any solvents to clean.
CAUTION:
Please follow the above guides to process, if not, it will cause
damage to the optics components, which should be excluded in
the warranty range.
1.4 Specification
OPTICAL CHARACTERISTICS
Mode of Operation
Pulsed
Output Beam Mode
M
2
< 1.8
Polarization Random
Central Emission Wavelength, nm
1064 +/- 2
Nominal Average Output Power, W
20
Output Power Tunability, W
0 to 20
Long-Term Average Output Power Instability (over 5
hours), %
< 5
Pulse Duration at 20 kHz, ns
70--120
