USING YOUR FRS BASE STATION
Dual Watch Function –
Dual Watch allows you to simultaneously
monitor any two pre-selected Family Radio Service channels.
Select first channel and CTCSS code, which you desired to Dual
Watch (please see page 9). Press and release FUNC button until
DW icon flashes. Press channel button up or down to select
second channel. Press FUNC button again to set CTCSS.
CTCSS channel will flash. Press channel button up or down to
select CTCSS. Press PTT button. This will store the second
channel and CTCSS and start Dual Watch. To terminate Dual
Watch and go to Normal Mode, Press FUNC or PTT buttons.
•
If a signal is detected, it will stay at that channel. If you want to
stay at that channel Press and release PTT button.
•
Until the end of RX signal 3 seconds later resume to scanning.
Talk Confirmation Tone Indicator –
To temporarily eliminate the
Talk confirmation Tone: Press FUNC button until flashing.
Press channel up or down to turn On or Off. To set option:
•
Press PTT button. This will immediately enter new setting;
•
Press FUNC button. This will enter new setting and go to new
function Mode;
•
Wait 10 seconds. It will go to Operational Mode with new setting.
Tone setting –
Press FUNC button until flashing
BEEP
icon.
Press channel button up or down to turn ON or OFF. To set option:
•
Press PTT button. This will immediately enter new setting;
•
Press FUNC button. This will enter new setting and go to new
Function mode;
•
Wait 10 seconds. It will go to Operation Mode with new setting.
To discard your save reset to original manufactory
– Press and
hold the FUNC button with pressing the power button to turn ON.
14
GETTING TO KNOW YOUR FRS BASE STATION
LCD Display
a. Scan mode is activated
b. DW mode indicator
c. RX (Receive) indicator
d. TX (Transmit) indicator
e. Weather mode activated
f. Calling (Transmit) indicator
g. Power Save Mode is activated
h. Talk confirmation Tone is active
i. Memory Displayed
j. Memory Scan Mode is activated
k. ON/OFF indicate optional for Talk confirmation tone,
Alert tone and Beep tone
l. Current subchannel selection
m. ALERT TONE is active
n. Current channel selection
o. BEEP TONE is active
p. Battery Power level
7
