Maxon TM-2102, Руководство пользователя

Страница: 16 / 32

Time Out Timer (TOT)
This function is to prohibit a radio from occupying one channel for a long period of time.
An alert sounds when the TOT timer expires. Transmit stops even if the PTT button is depressed.
A penalty timer is used to allow the unit to cool before transmission can be repeated.
2-Tone
When 2-tone is matched between caller and receiver in the status of programmed 2-tone, normal
communication is performed.
Horn Alert
This function is to alert people outside of the vehicle through external speaker when certain calls are
received.
Public Address
This function is to route audio to an external speaker or similar external
equipment.
Talk Around
When communication through repeaters is performed, this function is to allow communication among
radios directly if a repeater is out of range or usage is not required.
4.3 Advanced Operations of the radio - Contact your Dealer for information
or assistance with these operations.
Transmitting mode at TX channel during scan (Programmable)
1. Home: Sending signal is always on the channel from which scan was initiated.
2. Last Receive: Sending signal is on the last channel to receive a call.
3. Current Channel: Sending signal is on any channel within the scan list.
4. Priority Scan: When sending signal is initiated, it always transmits on the priority channel. When
a call is received it will transmit on the received channel as long as it is within the
Scan Dwell time. When scan resumes it transmits on the priority channel.
5. Priority Only: Anytime PTT is pressed, it transmits on the priority channel.
Hanger in Scan (Programmable)
Scan operates while a microphone hangs in the clip.
If the microphone is lifted up, scan stops during that time.
Off-Hook Monitor (Programmable)
When the microphone is on the hanger, the radio must receive CTCSS + carrier to open the audio.
When the microphone is off, the radio must receive carrier only to open the audio.
www.maxonamerica.com
13