LIFT CORPORATION
Sht. 12 of 56 DSG#
M-19-12
Rev.
-
Date: 01/06/20
BOLTING ON SPARE TIRE RELOCATOR BRACKET
NOTE:
The spare tire relocator bracket provides access to the spare tire hoist after the
Liftgate is installed.
1.
Position relocator bracket on the
inside lip of the pickup bed as shown
in
FIG. 12-1.
Ensure the spare tire
access tube extends through the
large hole in the new bracket.
POSITIONING RELOCATOR BRACKET
(FOR PICKUP)
FIG. 12-1
25-7/8”
RELOCATOR
BRACKET
2.
Use relocator bracket as a tem-
plate to mark and drill 2 holes, for
1/4”-20 screws, on the pickup bed
(FIG. 12-1)
.
HOLE FOR
1/4”-20 SCREW
& LOCK NUT
(2 PLACES)
CAUTION
Before drilling holes in the pickup
bed, ensure there are no obstruc-
tions to drill bit or items behind
sheet metal that could be damaged.
3.
Screw the relocator bracket to
pickup bed
(FIG. 12-1)
with two
1/4”-20 screws and lock nuts (Kit
items).
4.
Before installing Liftgate, ensure
plastic plug is removed from spare
tire access hole on rear of the
liftgate.
6-1/16”