309-1980
SIDE 4 OF 8 (3/12)
FREESTANDING DESK APPLICATIONS
Illustration 4. Bridge / Return to Desk:
Surpass
®
Illustration 4A. Attach Modesty Panel Bracket:
1. Place primary desk upside down onto cardboard or a carpeted surface.
2. On side of primary desk that bridge or return is to be attached, position modesty panel bracket against interior surface of full
end panel support.
If assembling a U-shaped configuration with a peninsula, align holes in bottom flange of modesty panel bracket with the first
pair of holes in bottom of full end panel support.
For all other configurations, align holes in bottom flange of modesty panel bracket with the second pair of holes in bottom of
full end panel support.
3. Install two sheet metal screws through holes in bottom flange of modesty panel bracket and into full end panel support.
4. Install a wood screw through top flange of modesty panel bracket and into primary desk worksurface.
5. Remove front machine screw securing full end panel support to worksurface. Save screw for later use.
Modesty panel
attachment bracket
Remove front machine
screw (save screw for
later use)
Sheet metal screw
First pair of holes - use for
U-shaped configuration with
peninsula
Second pair of holes - use
with all other configurations
Wood screw
Primary desk
Note:
If attaching bridge or return to a panel hung worksurface, attach modesty panel
bracket to full end panel support prior to attaching full end panel support to primary
worksurface.
