MaxonSM5102Radio
■
Emergency KEY
– When emergency button is pushed, an emergency signal is automatically transmitted for the specified time
period. This is where the DTMF tone to be transmitted as the Emergency Call can be entered. After the
emergency call, the transceiver performs transmission and reception alternately with the following conditions:
- Transmits the microphone signals
- Receives the signal and emits audio
When Press the PTT, the function is cancelled.
■
Two Tone Code Channel Selection
If the transceiver has [Two Tone] assigned to it, the automatic Two Tone transmission/reception function is
available.
To enable/disable Two Tone, Push the [Two Tone] key assigned by two tone function.
This function key is toggled.
■
DTMF Code Channel Selection
If the transceiver has [DTMF] assigned to it, the automatic DTMF transmission function is available. Up to 9
DTMF channels are available:
To Select DTMF code Channel:
- Push [ DTMF ] – a DTMF Code channel appears
- Push [UP] or [DOWN] to select the desired DTMF Code channel.
- Push [ DTMF ] to transmit the DTMF Code in selected DTMF channel.
■
SMS Code Channel Selection
If the transceiver has [SMS] assigned to it, the automatic SMS transmission function is available. Up to 9
SMS channels are available:
To select SMS code Channel
- Push [ SMS ] – a SMS Code channel appears
- Push [UP] or [DOWN] to select the desired SMS Code channel.
- Push [ SMS ] to transmit the SMS Code in selected SMS channel.
To change the baud rate:
- Push [1200/2400 bps]
■
SCAN Edit Mode
- You can edit your pre-programmed Group Scan List by adding or deleting scan list from the Group Scan
List. To activate scan list editing, press and hold the P1 button on the front of the radio and turn volume on
the radio. Upon entering the scan list edit function, the LCD displays the “Scan Edit ” message. To exit the
scan list edit function, turn volume off the radio.
1. Select the Scan Group
Each Scan Group would be displayed as “xx_nnn”. xx means group, and nnn means Channel. To activate
scan list editing for selected group, press the P1 button. You can change the Scan Group Number by up or
down button.
2. Adding or Deleting to Scan List
If each channel is in the ‘Scan Editable List’, Channel Number would display Scan Icon, . To add or delete
each channel to Scan Editable List, use P2 button.
■
Priority SCAN Channel Edit
Priority Channel can be setup by PC programmer. Priority Scan List is also editable by the radio. It is called
‘Priority Channel Edit Mode’. If turn on the radio with pressing P2 Button, the radio enters Priority Channel
Edit Mode. In the Priority Edit Mode, the LCD displays the “PscanEdit” message.
1.Select the Priority Group
Each Scan Group dispalys “xx_nnn”. ‘xx’ means the current Group and ‘nnn’ means channel. To activate P
scan list editing for selected Priority group, press the P1 button. You can change the Priority Group Number
by up or down button.