Maxon SM2102, Руководство пользователя, Страница: 3 / 12

1. SAFTEY WARNINGS
1. WARNING! NEVER connect the transceiver to an AC outlet. This may pose a
fire hazard or result in an electric shock.
2. NEVER operate the radio transmitter suitable artificial load or a correctly
specified antenna is connected.
3. NEVER connect the transceiver to a power source of more than 16V DC such as
a 24V battery. This connection will damage the transceiver.
4. NEVER cut the DC power cable between the DC Plug and fuse holder. If an
incorrect connection Is made after cutting, the transceiver might be damaged.
5. NEVER place the transceiver where normal operation of the vehicle may be
hindered or where it could Cause bodily injury.
6. NEVER expose the transceiver to rain, snow or any liquids.
7. NEVER modify a radio or accessory except as instructed in the service manual,
engineering bulletins or formal communication as this may invalidate any
warranty, guarantee or type approval.
8. USE the supplied microphone only. Other Microphones have different pin
assignments and may damage the transceiver, (optional DTMF MIC)
9. DO NOT use or place the transceiver in areas with temperatures below -30º or
above +60 º,In areas subject to direct sunlight, such as the dashboard.
10. AVOID operating the transceiver without running The vehicle’s engine. The
vehicle’s battery will quickly run out if the transceiver transmits while the
vehicle’s engine OFF
11. AVOID placing the transceiver in excessively dusty environments.
12. AVOID placing the transceiver in confined locations. This will obstruct heat
dissipation.
13. AVOID the use of chemical agents such as benzin or alcohol when cleaning, as
they damage the transceiver surfaces.
14. BE CAREFUL! The transceiver will become hot when operating continuously for
long periods.
15. DO NOT operate this equipment in environments containing explosive materials
or vapour.