13
ENGLISH
RCP660
④
SENSITIVITY
Controls input sensitivity to match
the output of guitar’s pickup. Set
this volume low for high gain active
pickups. The guitar signal and
RCP660’s input signal come to the
same level when this volume is
turned fully clockwise.
⑤
ATTACK
Controls pick attack intensity. Turn
this volume clockwise to emphasize
the attack and turn it
counterclockwise for lesser and
smoother attack.
⑥
SUSTAIN
Controls the duration of a picked
signal at a constant level, before the
note starts to fade. Turn it clockwise
for more compression. Set it slightly
low to use this effect as a limiter.
⑦
MASTER
Controls effected output volume.
Turn it clockwise for more volume.
Typically output levels of both
normal tone and effected tone
should be adjusted to equal levels.
⑧
EFFECT ON/OFF
⑨
EFFECT LED
A switch for effect on/off. Stepping
on this switch alternately turns
effects and EFFECT LED on and
off.
⑩
BOOST ON/OFF
⑪
BOOST LED
A switch to boost the output level.
Stepping on this switch alternately
turns boost and BOOST LED on
and off.
* When the effect is off, the boost
switch turns LED on but doesn’t
boost the output level.
This product has a built-in
tube, so do not subject it to
shock or excessive pressure.
It takes one or two minutes for
the tube to work properly after
it’s powered on.
