Maxon Railift RC-2B Скачать руководство пользователя страница 5

2.  Do not exceed rated 

load capacity

 of the Liftgates which is 

 

2,000 lbs. for model RC-2B, 3,000 lbs. for model RC-3B, 

 

4,000 lbs. for model RC-4B, 5,000 lbs. for model RC-5B, and 

 

6,000 lbs. for models RC-6B and RC-6K.

3.  Do not allow any part of your body to be placed under, within, or 
 

around any portion of the moving Liftgate or its mechanisms, or in

 

a position that would trap them between the platform and the fl oor 

 

of truck body (or between platform and the ground) when Liftgate 
is operated.

4.  Consider the safety and location of bystanders and
 

location of nearby objects when operating the Liftgate. Stand 

 

to one side of platform while operating the Liftgate. Be certain

 

that the area the Liftgate will move through during operation 

 

is clear of all obstacles.

5.  Comply with all attached instruction decals and warning decals.

11. Above 

all, 

USE GOOD COMMON SENSE

 when operating this 

 Liftgate.

8.  Do not move vehicle unless Liftgate is correctly stowed.

6.  Keep decals clean and legible. If decals are illegible or missing, 

have them replaced. 

Get free replacement decals

 

from

 

Maxon. 

7. 

Never drive a forklift on the Liftgate platform.

10.    A correctly installed Liftgate will operate smoothly and reasonably 

quiet. The only noticeable noise, during Liftgate operation, is from 
the power unit while the platform is being opened (SD models 
only), lowered (power down models only), raised, or closed. Listen 
for scraping, grating and binding noises and have the problem  
corrected before continuing to operate the Liftgate.

MAXON Lift Corp. Customer Service

11921 Slauson Ave

Santa Fe Springs, CA 90670

(800) 227-4116

9. 

Correctly stow platform when not in use. Extended platforms  
could create a hazard for people and vehicles passing by.

1.  Incorrect operation of this Liftgate can result in serious personal 
 

injury. Comply with

 WARNINGS

 and Liftgate operating instructions 

 

in this manual. Do not allow untrained persons to operate the 

 

Liftgate. If you need to replace an 

Operation Manual

, additional 

 

copies are available from:

12.  Never use a cell phone while operating the Liftgate.

WARNINGS

WARNING

!

5

Содержание Railift RC-2B






























Отзывы: