Answering Calls
■
when an incoming call is received the phone rings,
visual alert LED flashes, “ Incoming Call “ appears on
the display and vibrator (if fitted and enabled)
intermittently turns on.
■
to answer the call, fully extend the antenna for best
performance then open the Flip to answer.
■
during the ring tone, the caller’s number and name
may be displayed if supported by the network (refer
section 11.2 for details)
■
to hang up at the end of the call, press or close
the Flip
Auto Call Answering
■
you can set the phone to automatically answer to
incoming calls after a specified numbers of rings.
[menu] + [setup] + [AutoAnswer]
+ / [choose one] + [select and exit]
or [select without exit]
There are choices from “OFF” to 1.3.5 rings
WARNING: If you use this feature when the ringer is
switched off (set to “ silent” ) you may receive a call
without your knowledge.
Missed Calls
■
missed (unanswered) incoming calls are entered onto
the Call List if the caller’s number is available. The
phone also displays the message ‘Missed (number)
Call’ and the time of the last missed call if connected to
the CDMA network
■
to clear the message on screen, press or
Emergency Calls
■
your national emergency services numbers are stored
in a special memory in the phone to enable the calls to
be made even when the phone is locked or the restrict
feature is set.
■
ignore any phone locked or restricted messages and
dial as normal. The call should be successful if you are
within network coverage and there is sufficient signal
s t r e n g t h
Dial Emergency Number and press send button.
For example if the Emergency number is 911;
+ + +
6
6.3
6
6.4
Privacy Mode
■
if supported by your service provider, this feature will
further encrypt calls made on the CDMA
network(when ‘Enhanced’ is selected)
[menu] + [security]
*Phone will ask for LOCK CODE.
press + + + or
the four digit lock code if you programmed into the
p h o n e .
press [privacy] + / [choose setting]
+ [select and exit] or [select whitout exit]
