manualshive.com logo in svg

Maxon DMD series, Руководство по обслуживанию

Поделиться
Скачать
Maxon DMD series Скачать руководство пользователя страница 7

11921 

Slauson 

A

ve. 

 Santa 

Fe 

Springs, 

CA. 

 90670 

 (800) 

227-41

16 

 F

AX 

(888) 

771-7713

7

•

 Do not stand, or allow obstructions, under the platform when lowering the Liftgate. 

Be sure your 

feet are clear of the Liftgate.

• Keep fi ngers, hands, arms, legs, and feet clear of moving Liftgate parts (and platform 

edges) when operating the Liftgate.

•

 

Disconnect Liftgate power cable from battery 

before repairing or servicing Liftgate.

•

 If it is necessary to stand on the platform while maintaining the Liftgate, keep your feet and any 

objects clear of the inboard edge of the platform. Your feet or objects on the platform can become 
trapped between the platform and the Liftgate housing cover.

• Correctly stow platform when not in use. Extended platforms could create a hazard for 

people and vehicles passing by.

•

 Recommended practices for welding on steel parts are contained in the current 

AWS (American 

Welding Society) D1.1 Structural Welding Code - Steel

. Damage to Liftgate and/or vehicle, and 

personal injury could result from welds that are done incorrectly.

•

 Recommended practices for welding on aluminum parts are contained in the current 

AWS   

(American Welding Society) D1.2 Structural Welding Code - Aluminum

. Damage to Liftgate 

and/or vehicle, and personal injury could result from welds that are done incorrectly.

WARNINGS

Comply with the following WARNINGS and SAFETY INSTRUCTIONS while maintaining 
Liftgates. See Operation Manual for operating safety requirements.

I

nstalling and maintaining a liftgate can expose you to chemicals, including lead, which are known 

to the State of California to cause cancer and birth defects or other reproductive harm.  To mini-
mize exposure, install and maintain liftgate in a well-ventilated area and wear 

proper Personal 

protective equipment (PPE)

. For more information go to 

www.P65Warnings.ca.gov

.

WARNING

!

WARNING

!

Содержание DMD series




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды