Maxon 299018-01, Инструкция, Страница: 5 / 10

LIFT CORPORATION Sht. 5 of 10 DSG#
M-18-02
Rev. - Date: 10/11/18
© MAXON Lift Corp. 2018
4. Before welding new mounting plates in
position, wrap hydraulic hoses close to
the welds, with small welding blanket
(FIG. 5-1A) . Protect hoses on the main
frame, from heat and splatter, with
another welding blanket
(FIG. 5-1) .
COVERING HYDRAULIC HOSES
FIG. 5-1
WELDING
BLANKET
FIG. 5-1A
WELDING
BLANKET
5. Weld mounting plates to main
frame as shown in
FIG. 5-2 .
WELDING MOUNTING PLATES
TO MAIN FRAME
FIG. 5-2
MOUNTING
PLATE
MAIN FRAME
5/16”
LH & RH
MOUNTING
PLATES
HYDRAULIC
HOSES
5/16”
7. Install liftgate on vehicle according to
instructions in the installation manual.
6. Remove welding blankets.
NOTE: Use new plastic ties (not provid-
ed with kit) to secure the tubes
and hoses to main frame on
Gravity Down models.