About this Document
© 2017 maxon motor. Subject to change without prior notice.
maxon motor control
1-6
Document ID: rel7748
EPOS2 Positioning Controller
Edition: November 2017
EPOS2 24/2 Hardware Reference
Table 1-2
Symbols & Signs
1.5
Trademarks and Brand Names
For easier legibility, registered brand names are listed below and will not be further tagged with their
respective trademark. It must be understood that the brands (the below list is not necessarily conclud-
ing) are protected by copyright and/or other intellectual property rights even if their legal trademarks are
omitted in the later course of this document.
Table 1-3
Brand Names and Trademark Owners
1.6
Copyright
© 2017 maxon motor. All rights reserved.
The present document – including all parts thereof – is protected by copyright. Any use (including repro-
duction, translation, microfilming and other means of electronic data processing) beyond the narrow
restrictions of the copyright law without the prior approval of maxon motor ag, is not permitted and sub-
ject to persecution under the applicable law.
maxon motor ag
Brünigstrasse 220
P.O.Box 263
CH-6072 Sachseln
Switzerland
Phone +41 41 666 15 00
Fax +41 41 666 16 50
Information
Requirement /
Note / Remark
Indicates an activity you must perform prior
continuing, or gives information on a particular item
you need to observe.
Best Practice
Indicates an advice or recommendation on the
easiest and best way to further proceed.
Material
Damage
Indicates information particular to possible damage
of the equipment.
Type
Symbol
Meaning
The brand name(s) …
… is/are a registered trademark(s) of …
Adobe® Reader®
© Adobe Systems Incorporated, USA-San Jose, CA
Micro-Fit™
Mini-Fit Jr.™
© Molex, USA-Lisle, IL
Pentium®
© Intel Corporation, USA-Santa Clara, CA
Windows®
© Microsoft Corporation, USA-Redmond, WA
