EN-12
E15
Section 2 battery
core low voltage
Single-cell voltage ≤ 2.8V
Charge, voltage≥ 3.0V, self-
recovery
E16
Section 3 battery
core low voltage
Single-cell voltage ≤ 2.8V
Charge, voltage≥ 3.0V, self-
recovery
E17
Section 4 battery
core low voltage
Single-cell voltage ≤ 2.8V
Charge, voltage≥ 3.0V, self-
recovery
E18
PV input over voltage
PV voltage≥ 45V
PV voltage≤ 40V,self-recovery
E20
PV output over
current
Charge current>10A
Remove PV, charge recovery
E26
DC12V output
overload
DC12V load > 145W
Remove load, restart DC
E34
System overloaded,
turn off DC
Total power>800W
Remove load, restart DC
E36
Inverter output
overload
Inverter overload
Remove load, restart AC
E37
Inverter output
overcurrent
Inverter overload or short-
circuit
Remove load, restart AC
E38
System overload,
turn off AC
Total power>800W
Remove load, restart AC
！
Note:
The protection values set above are all theoretical values, and there will be
slight deviation from the actual protection values, this is normal.
8. Frequently Asked Questions and Answers(FAQ)
●How to check the state of charge?
The battery icon display on the LCD display shows the battery level and charge status.
●How to use the product to charge other electronic
devices?
(1) Check the user manual or search for such information online to learn about the
charging parameters of the electronic devices.
(2) Check the power of each output port. For example, the maximum rated output power
of the AC output port is 600W, This means that if the power of the connected electronic
device exceeds 600W for a long time, the inverter will turn off the output.
●What is the depth of discharge (DOD)?
To prolong the battery life, the product has a DOD setting to 90%, which means that only
90% of the battery capacity can be discharged, and retain 10% to avoid damage to the
battery due to excessive discharge.
●Can it charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in order to
protect the battery life.
●Can it be charged by using 2 solar panels in series?
Yes, just make sure the total open circuit voltage (VOC) of the solar panels are less than
