Maxmeen MG-TA1500, Руководство пользователя

Страница: 5 / 8

REAR PANEL DESCRIPTION
1. Power Cord 8. Bridge Switch
2. Grounding Screw 9. Channel 2 Link Jack (XLR)
3. Channel 2 Output Jack 10. Channel 2 Input Jack (XLR)
4. Channel 1 Output Jack 11. Channel 2 Input Jack (1/4
”)
5. Reset Button 12. Channel 1 Input Jack (1/4
”)
6. Channel 2 Speaker Out Jack 13. Channel 1 Input Jack (XLR)
7. Channel 1 Speaker Out Jack 14. Channel 1 Link Jack (XLR)
3. Connection
Example:
1. Driving a single 8 ohm speaker with the combined 4 ohm power of both channel
2. Driving a single 4 ohm speaker with the combined 2 ohm power of both channel
Precautions:
1. Bridge mono mode makers it possible to drive thousands of watts into a single speaker AC
current consumption will usually be higher avoid excessive single level and made sure the
wiring speaker can handle the power.
2. Do not use 2-ohm loads.
Installation:
Rack mounting of the amplifier is optional use four screws and washers when mounting the
amplifier to the front rack rails.
Connections inputs:
Each channel has active balanced XLR and 1/4” (6.3mm) inputs wired in parallel. The input
impedance is 20k ohms balanced 10k ohms unbalanced.