�.
L
ITALIA
maxluxitalia.com
|
+390200615928
��� U.X.
SISTEMI MULTIMEDIALI PROFESSIONALI
MX
0101
OPERATION CONTROLS AND FUNCTIONS
Front Panel
POWER
LOCK
MENU
OUT
A
1
B
2
C
3
D
4
IN
E
5
F
6
G
7
H
8
8X8 DVI MATRIX CMSI-8D8DSA
2
3
4
5
6
1
1
LCM: Displays the setting information of each input and output
setting.
2
POWER: Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3
LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate green when locked.
4
IR: IR Receiver window (accepts the remote control signal of this
device only).
5
MENU: Press this button once to select EDID setting from STD
(internal) 1 or TV (external) 2 then press it again to confirm the
selection. Press this button every to confirm the selection.
Note: For the 'TV' EDID setting, the unit will read and store the
EDID information of the display connected to HDMI output A. For
the 'STD' EDID setting the unit's built-in EDID setting will be used
(1080p@60/12-bit for video and LPCM 2CH for audio).
6
1~8/A~H and IN/OUT: Press the OUT or IN button to select the
output or input mode and then press the required number button
to make the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of
button presses need to be performed:
Press: OUT
A
B
C
D
IN
1
MENU,
and then press: OUT
E
F
G
H
IN
2
MENU.
Note: If the MENU button is not pressed the selection will not be
changed.