Maxis TG799vn, Руководство пользователя

Страница: 36 / 39

Calling over VoIP
If you have problems calling via VoIP, check whether:
•
Your phone is correctly connected to the Thomson Gateway.
•
Your phone is working on the traditional telephone network (PSTN):
Connect your phone directly to the telephone wall outlet.
Try to make a phone call.
•
Your phone number, user name, and password are configured correctly.
•
The registrar’s and proxy server’s IP address and port number are configured correctly.
•
The Power, Broadband/DSL and Voice LEDs are on.
Resetting your Thomson Gateway
If at some point you can no longer connect to the Residential Gateway or you want to make a fresh install, it
may be useful to perform a reset to factory defaults.
Methods
You can choose between:
•
Resetting the Residential Gateway via the Residential Gateway GUI
•
Reset the Residential Gateway via the Reset buttonts
Resetting the Residential Gateway via the Residential Gateway GUI
Proceed as follows:
1. Browse to the Residential Gateway GUI.
2. On the
Residential Gateway menu, click Configuration.
3. In the Pick a task list, click Reset my Residential Gateway.
4. The Residential Gateway restores the initial configuration and restarts.
5. The Residential Gateway returns to the Residential Gateway home page (unless the IP address of your
computer is not in the same subnet as the default IP address of the Residential Gateway, being
192.168.1.254).
Reset the Residential Gateway via the Reset button
Proceed as follows:
1. Make sure the Residential Gateway is turned on.
2. Push the
Reset button until the Power LED lights red
- this will take about 7 seconds.
3. Release the Reset button.
4. The Residential Gateway restarts.
RESIDENTIAL GATEWAY MODEL TG799VN | 36
14. RESET TO FACTORY DEFAULT
Warning: A reset to factory default settings deletes all configuration changes you made. Therefore, after
the reset, a reconfiguration of your Residential Gateway will be needed.
Also your wireless clients will have to be re-associated.