MAXINCOM MWG1002 Скачать руководство пользователя страница 44

Страница: 44 / 55

MWG1000 Series User Manual

Http://www.maxincom.com

44 / 55

Pedantic

Enable pedantic parameter. Default: no.

Always authreject If enabled, when MWG1004 rejects “Register”or “Invite”

packets, MWG1004 always

respond the packets using

“SIP404 NOT

FOUND”. It’s

recommended to be

enabled for security.

DNS SRV Look Up Please enable this option when your SIP trunk contains

more than one IP address.

Maxexpiry

Maximum duration (in seconds) of a SIP
registration.Default is 3600 seconds.

Minexpiry

Minimum duration (in seconds) of a SIP registration.

Default is 60 seconds.

Defaultexpiry

Default Incoming/Outgoing Registration Time: Default

duration (in seconds) of incoming/outgoing

registration.

Qualifyfreq

How ofen to check for the host to be up in seconds and
reported in milliseconds with sip show settings.

Qualifygap

Number of milliseconds between each group of peers
being qualified.

Number of seconds to wait for a response from a SIP

registrar before timed out. Default is 20 seconds.

SIP Registrar before giving up. Default is 0 (no limit).

RTPtimeout

Terminate call if set # seconds of no RTP or RTCP
activity on the audio channel when we’re not on hold.

RTPholdtimeout

Both ends of the call time

RTPkeepalive

Time of packaging

Notifyringing

Control whether subscriptions already INUSE get send
RINGING when another call is sent.

Notifyhold

Notify subscriptions on HOLD state.(default:no)

Session -timers

Enable session-timer mode, default: yes. If you

found

the call is cut off every 15 minutes every

time, please

disable this.

Session-refresher

Choose session-refresher, the default is Uas

Session-expires

The max refresh interval

Session-minse

The min refresh interval, which mustn't be shorter than
90s.

DTMF mode

Set default mode for sending DTMF. Default setting:

rfc2833

Relaxdtmf

Relax dtmf handing

Trustrpid

If Remote-Party-ID should be trusted

Sendrpid

If Remote-Party-ID should be sent

Contactdeny

Contactpermit

Use contactpermit and contactdeny to restrict at what

IPs your users may register their phones.

Canreinvite

Asterisk by default tries to redirect the RTP media
stream to go directly from the caller to the callee.Some

Содержание MWG1002
























































Результаты поиска

Содержание MWG1002

Отзывы:

MAXINCOM MWG1002, Руководство пользователя, Страница: 44 / 55

Результаты поиска

Содержание MWG1002

Отзывы: