ENGLISH
LNB Power:
Press LEFT/RIGHT to set the LNB power.
Default is ‘13/18V’.
22kHz:
Press Left/Right to switch on or off the 22kHz.
Default is ‘auto’.
Toneburst:
Select or disable toneburst command.
DiSEqC1.0:
select the right DiSEqC port (up to 4) for the correct input.
DiSEqC1.1:
select the right DiSEqC port (up to 16) for the correct input.
Motor:
Press Left/Right to select DiSEqC 1.2 setting. Then Press OK to show the
menu to set the positions.
DiSEqC1.2:
Move the motor to a right position to lock the signal.
Move Auto:
Press LEFT/RIGHT to start to move West/East. It will be stopped
automatically when the signal is locked.
Move Continue:
Press LEFT/RIGHT to start to move West/East. It will keep
moving until you stop it.
Move Step [1]:
Press LEFT/RIGHT to move just a step.
Store Position:
Store current position of motor.
Goto Position:
Press LEFT/RIGHT to go to the position stored.
Goto Reference:
Reset all the positions.
19
Содержание XO-30 S
Страница 2: ...Copyright Kjaerulff 1 Digital A S www kjaerulff1 com...
Страница 127: ......
Страница 128: ......
