Maximum 054-8355-0, Инструкция по эксплуатации

Страница: 10 / 18

19 18
INTENDED USE
This circular saw is designed for wood cutting applications.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use this
tool.
FITTING AND REMOVING THE BATTERY PACK TO THE
CIRCULAR SAW
• To install the battery pack to the tool, align the raised
portion of the battery pack with the grooves on the
bottom of the tool handle, and slide it firmly into the
handle until you hear the lock snap into place (Fig. A).
• To remove the battery pack from the tool, press the
battery pack release button and slide the battery pack
completely out of the tool handle.
INSTALLING DUST NOZZLE
When you wish to perform clean cutting operation, connect a
vacuum cleaner to your tool.
Install the dust nozzle (1) on the tool using the screw (2).
(Fig.B) Then connect the vacuum cleaner hose to the dust
nozzle.
OPER
A
TING INS
TRUCTIONS
KNO
W Y
OUR T
OOL
WARNING!
• Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is enough to
cause severe injury.
• Before attempting to use this cordless tool, become familiar
with all of its operating features and safety requirements.
• To reduce the risk of serious personal injury, turn tool off
and disconnect battery pack before making any adjustments
or removing/installing attachments or accessories.
CAUTION!
When placing battery pack in the tool, be sure raised rib on
battery pack aligns with the bottom of the tool and latches into
place properly. Improper installation of the battery pack can
cause damage to internal components.
NO. DESCRIPTION
1 LEFT HOUSING
2 SPRING
3 LOCK-OFF BUTTON
4 TRIGGER SWITCH
5 SCREW
6 SCREW
7 FAN BAFFLE
8 RIGHT HOUSING
9 SCREW
10 HOUSING COVER
11 HEX WRENCH
12 SCREW
13 LOCKING LEVER
14 SUPPORT PIECE
15 SUPPORT PIECE SLEEVE
16 PCB ASSY
17 LED COVER
18 BLADE BOLT
19 OUTER FLANGE
20 BLADE
21 INNER FLANGE
22 SCREW
23 STOPPER
24 FIX PIN
25 TOP GUARD
NO. DESCRIPTION
26 SCREW
27 SCREW
28 NUT
29 SPINDLE LOCK BUTTON
30 SPRING
31 LOCK PIECE
32 GEAR CASE & MOTOR ASSY
33 SCREW
34 CIRCLIP
35 LOWER GUARD
36 GUARD INNER SLEEVE
37 TORSION SPRING
38 BEVEL LOCK KNOB
39 WASHER
40 SCREW
41 BEVER POINTER
42 BEVEL SUPPORT
43 BOLT
44 DEPTH ADJUST SUPPORT
45 FIX PIN
46 SHOE
47 SCREW
48
LOCK ROD
49
DUST NOZZLE
model no. 054-8355-0 | contact us 1-888-670-6682