12
model no. 054-7556-8 | contact us 1-888-670-6682
DUST CANISTER
(fig 2)
Your sander is supplied with a dust
canister to help you keep the working
area clean. The dust canister is ideal for
smaller jobs. For maximum efficiency,
the dust canister should be emptied
frequently during operation.
To install:
1. Disconnect the sander from the power
source.
2. Align the slot on the dust canister with the rib on the tool, and then push the
dust canister onto the tool until it locks into place.
To remove:
1. Disconnect the sander from the power source.
2. Simply pull the dust canister away from the tool.
CLEANING AND EMPTYING THE
DUST CANISTER
(fig 3)
1. Remove the dust canister from the
tool.
2. Hold the dust-canister body and pull
away the microfilter by pressing the
release button.
3. Knock excess dust out of the
microfilter, or remove dust with a soft
brush. You may notice that all the dust may not come out of the microfilter.
This will not affect sanding performance, but will reduce dust collection
efficiency.
OPER
A
TING INS
TRUCTIONS
fig 3
WARNING!
• Be extremely careful of dust disposal; materials in fine particle form may
be explosive. Do not throw sanding dust on an open fire. Combustion from
mixture of varnishes, lacquers, polyurethane, oil or water with dust particles
can occur if there is a static discharge, a spark introduced in the canister, or
excessive heat.
FPO
fig 2
Rib
