13
TM
OPER
A
TING INS
TRUCTIO
NS
ADJUSTABLE DEPTH GAUGE (Fig. D)
Fit the drill bit into the chuck. Loosen the depth
gauge by rotating the handle grip counter-clockwise.
Slide the depth gauge until the distance between the
depth gauge end and the drill/driver bit end is equal
to the depth of hole you wish to make. Then clamp
the depth gauge by rotating the handle clockwise.
MOUNTING OF BIT IN CHUCK
When mounting the drill bit, insert bit between the
chuck jaws as far as it will go. Ensure drill bit is in
the centre of the chuck jaws. Using the chuck key
provided, there are three holes in which the chuck
key should be inserted. Tighten at all three holes,
not just one. Your drill bit is now locked in the chuck.
The bit can be removed by reversing the above
procedure.
SPEED SELECTOR (4)
Choose position 1 for high-torque/low-speed range
for large diameter drill bits. Choose position 2 for
low-torque/high-speed range for small diameter drill
bits. If the gears do not engage easily then rotate
the chuck by hand to align the gears. Never change
the gears when the tool is rotating. Wait until it has
stopped.
WARNING!
• Before installing accessory, remove plug from power supply.
Do not attempt to tighten drill bits (or any other accessory)
by gripping the front part of the chuck and turning the tool on.
Damage to the chuck and personal injury may result.
FPO
1
2
Fig. A
Fig. B
Fig. C
Fig. D
