CCpilot VA
1.2
Technical Manual
2017-03-13
www.maximatecc.com
14
3.6.
Handling and maintenance
Handle the device with care and pay attention to the following handling instructions:
Disconnect all cables to the device during welding or when performing other service to the
machine imposing a risk of damaging electronic devices.
Service and repair to the device shall only be made by authorised personnel. If the device is
opened by unauthorised personnel, its warranty will be voided.
Scratches or other damages may occur to the display surface if it is exposed to sharp objects
or heavy impacts. This must be avoided to increase the longevity of the screen.
The internal NAND flash storage has a limited number of write cycles. Therefore it is
recommended that the amount of writing to flash is limited within software applications.
Always consider personal safety when installing and operating the device. For example, in
vehicle installations,
maximatecc
does not recommend that the device is being actively
operated by the driver when a risk of injury to people or damage to property is present.
3.6.1.
Cleaning
To ensure proper and reliable functionality over time, pay attention to the following cleaning
instructions and precautions:
Wipe the device clean from dirt using a soft damp cloth, preferably of microfiber type. Larger
amount of dry dust may be swept off using a soft brush before wiping clean.
Avoid using alkaline, alcoholic or other potentially adverse chemicals for cleaning as doing so
may damage the device. However, small amount isopropyl alcohol may be used for removing
harsh stains.
Avoid spraying or by other means applying larger amount of water or alcohol directly to the
device. Instead, lightly dampen a cloth before using it for cleaning the device.
After cleaning, make sure that the device surface is left dry.
Never use high-pressure air, vacuum, water or steam to clean the device.
3.6.2.
RTC clock back-up battery
Time and date information is stored in a memory sustained by an internal back-up battery.
The expected life time of the battery is approximately 10 years. Contact supplier for instructions on
replacing the battery.