Maxima ATHENA 6, Руководство пользователя

Страница: 7 / 24

7
MACHINE OPERATION
1
st
STEP: TANK FILLING
• Remove the plug (fig.1)
• Fill the tank with water by using the suitable bottle supplied (fig.2) and by respecting the
maximum capacity of the tank (any excessive water will be automatically discharged in the
lower drum)
• Put the plug again.
• When turning the equipment on or every time the boiler is emptied (e.g. for cleaning) fill the
boiler with water through the opening of the safety plug (fig. 3), then close it by screwing the
plug without pushing it too much to avoid damaging the seal.
NOTE: Use only the bottle supplied and avoid using any other object such as glasses and funnels
to fill the tank. It may be overfilled. DO NOT USE DISTILLED WATER.
2
nd
STEP: LOWER DRUM FILLING
• Unhook the closing device and lift the upper cover up (fig. 4)
• Fill the lower drum with about 2 litres of clean water (fig.5)
• Reposition the cover by paying attention to the drum level indicator. It must be in the front
part (fig.6)
IMPORTANT: to avoid motor damages during the suction check that the liquid contained in
the drum does not exceed the level indicated on the drum itself (MAX) (fig.6), otherwise we
recommend emptying the drum.
WARNING:
•
Fill the lower drum only with water.
•
Do not use fragrances-essential oils different from the ones approved by the
Manufacturer. They may damage the drum.
•
Empty and wash the drum after each use.
•
To clean the drum, use natural soap and rinse with abundant water.
FIG.2 FIG.3 FIG.1
FIG.5 FIG.3 FIG.4 FIG.6