Maxima 2 Levels, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 52

Chapter 1
General Information
7
1 GENERAL INFORMATION
1.1 General safety instructions
Before using the machine, carefully read all of this manual, which is an integral part of the machine.
Knowing the information and instructions in this manual is essential for users to use the machine correctly and safely.
The manufacturer declines all responsibility in the event of modifications, tampering or any operations carried out in a way
that does not coincide with what is specified in this manual, since they may put the health and safety of personnel and/or
objects at risk. The manufacturer reserves the right to take legal action against anyone who modifies its machines without
written permission.
The person in charge of machine use and/or the employer must make sure that users are trained and aware of all information
and instructions in the documentation supplied.
Users are only permitted to carry out work on the machine which is within their area of responsibility and for which they
have been trained.
The user shall be held fully responsible for any modifications he makes to the machine.
Only operators with the appropriate professional technical qualifications may carry out checks or repairs on the machine.
Reliable operation and optimised machine performance are only guaranteed by the use of original spare parts. The man-
ufacturer reserves the right to make any changes considered appropriate to the machine described without prior notice.
The user is responsible for all operations needed to keep the machine efficient during its use.
1.2 Information about precautions, specific warnings and symbols
Where necessary, this manual includes information alongside machine operating and maintenance instruc-
tions or procedures.
There are also
indications marked with the “Caution/Danger” symbols, shown in bold type and upper case
letters to make them clearly visible.
The “GENERIC CAUTION/DANGER” symbol is used to indicate that failure to comply with the safety
regulations described in this manual could result in
“Damage to the machine and/or objects and injury
to machine
users”
.