E
N
G
LI
S
H
7
OPERATION
1
Switch on the appliance by using the "ON/OFF Button".
2
Set your desired temperature using the thermostat dial. During the heating process the heating indicator
light will turn on.
3
When the heating indicator deactivates, the unit has reached the set temperature and is ready for use.
4
Before adding the batter, lightly coat the cooking plates with butter or cooking oil (non-stick baking spay
also works well). This will help avoid the tarlets sticking to the cooking plate.
5
Set the timer as desired. When the set time has passed, the timer will ding.
6
Check if the product is cooked properly and remove it using a wooden or plastic utensil.
Use caution when removing the product, hot cooking surface can cause serious burns. It is recommended
to use protective gloves during handling..
7
Switch off the appliance when not in use.
8
Clean the appliance after use (see chapter "Cleaning and Maintenance").
9
If the appliance will not be used for a longer period, always switch off and disconnect the power supply.
TROUBLESHOOTING
The following overview will help you understand possible problems. However, only qualified technicians
should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The appliance does not work.
]
The appliance is switched off.
]
The power supply is interrupted.
]
The voltage is not correct.
f
Activate the appliance.
f
Check / connect the power supply.
f
Use a compatible power source.
The appliance does not
get warm
]
Low temperature settings.
]
Thermostat defective.
]
Heating element defective.
f
Adjust temperature setting.
f
Replace part.
f
Replace part.
Temperature cannot
be adjusted.
]
Thermostat defective.
f
Replace part.
