Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
First Time Use
•
Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to
the machine then immediately contact your supplier. Save all packaging materials in case the machine
needs to be returned or inspected by the freight carrier.
•
Remove any protective film from all surfaces (if applicable).
•
Read this instruction manual completely before attempting to install and operate this product. When in
doubt, contact your supplier.
•
Before using the appliance for the first time, it is recommended to clean the appliance according to
instructions
(see chapter “
Cleaning and Maintenance
”
).
Installation
1.
Level and position the appliance on a flat and stable surface. If not level, the appliance might function less
effectively.
2.
Use clamps to fix the appliance in position if possible.
3.
When positioning the Meat Mixer make sure it is easily accessible for cleaning and ease of use.
4.
Attach the drive arm and paddle assembly (if required).
5.
Make sure you can operate the drive arm without obstruction.
Operation
•
Remove the lid from the machine.
•
Add your products from the top. Do not exceed the recommended maximum load.
•
Place the lid back on top.
•
Rotate the drive arm to mix your products. Repeat this process until all ingredients are evenly distributed.
•
Remove the product from the bowl.
•
Always clean the appliance after use (see chapter “
Cleaning and Maintenance
”).
Troubleshooting
The follow overview will help you understand possible problems. However, only qualified
technicians should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The machine does not function
properly.
▪
Axle not assembled correctly.
▪
Handle not mounted
correctly.
➢
Reassemble the axle.
➢
Reassemble the handle.
