Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Troubleshooting
The follow overview will help you understand the control panel and possible problems. However, only qualified
technician should attempt to open or repair the machine. Contact your supplier when in doubt.
Problem
Possible Cause
Possible Solution
The appliance does not work.
▪
The appliance is switched off.
▪
The power supply is
interupted.
▪
The voltage is not correct.
▪
The power switch is in the
wrong position.
➢
Switch on the appliance.
➢
Check the power supply, plug
in power cable.
➢
Use another power source.
➢
Put switch in position “I” or
when using foot pedal in
position “II”.
The appliance has stopped
working.
▪
Motor overheated.
▪
Overload.
➢
Let appliance cool down and
reduce load (weight/time).
➢
Reduce load.
Cleaning and Maintenance
•
Maintenance and repairs should only be done by certified engineers.
•
Regularly check and clean the appliance, its parts and accessories.
•
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
Instead, have it repaired by a certified electrical engineer.
•
Always switch off and disconnect the power supply before cleaning or maintenance.
•
ATTENTION! Use food safe detergent only. Never use aggressive cleaning agents or abrasives. Do not use
solvents or petrol based cleaning agents. Some cleaning agents may leave harmful residues or cause
damage to the machine.
•
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to
the machine.
•
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the
exterior with a damp cloth. Do not use a steamer to clean the appliance
•
ATTENTION! Never let the power cable or power plug get wet or damp.
•
Clean parts and accessories using a brush, damp cloth or sponge with warm soapy water (do not clean in
dishwasher). Always dry the appliance, parts and accessories after cleaning using a soft cloth.
•
For easy access to the rolling pins, first remove the (transparent) protective cover by undoing the screws
which connect it to the main body.
•
Undo the two springs, located underneath the thickness selector, to loosen the scrapers.
•
Use a brush to remove any excess dough/flour residues from the body, scrapers and rolling pins. More
tenacious residues can be removed using a damp cloth or sponge. Dry after cleaning.
•
It is reccommended to lubricate the rolling pins, shafts and gears once a year. This process requires
extensive disassembly, please contact supplier for service or support.
