LED Panel Installation:
CAUTION:
• Read all instructions before installing.
• Turn off power at main switch power supply prior to
installation to prevent electrical shock.
• For display or under cabinet only. Not intended for ceiling use.
• System is intended for installation in accordance with National
Electric Code, and local regulations. Consult
with local inspector to assure compliance.
• Keep away from combustible materials such as
plastic or paper products.
• Do not touch cover when light is on.
Do not operate with missing or damaged wires.
• Retain instructions for future reference.
1 – Locate LED panels fitting plate in desired location and
fasten to fitting plate using provided screws.
Note: Orient panel fitting plate so that the panel input socket
is in the proper direction to mate with control cable.
2 - Fasten to fitting plate using provided screws.
3– Using the magnet clips to fix in the hole of panel .
4 – Putting the flatpanel into the fitting plate directly and
change the postion to be the proper location to make sure the
led flatpanel can be fasten enough.
Linkable using :
Add additional LED panels as necessary, connecting output
of one panel to the input of the adjacent panel using either a
12"link cable or a direct connector. (NOTE: TOTAL PANELS NOT
TO EXCEED POWER SUPPLY WATTAGE)
MX-L120-SL Slim Under Cabinet